Acme 3D Denture Base Resin

Molding test environment and standards: ①Temperature: 23±2℃ ②Relative humidity: 50%RH±5%RH ③Test spline standard: ASTM ④ Post-curing conditions: Put the test strip in water and post-cure the front and back sides under 200mw/cm² of 405-band ultraviolet rays 1 minute. Technical parameters after molding: Maximum force (KGF) 108.7±10% Tensile strength (MPa) 25.62±10% Deformation at the point of maximum force (mm) 9.99±10% Elongation at yield point (%) 5.50±10% Elongation at break (%) 17.65±10% Maximum bending strength (MPa) 25.48±10% Flexural modulus of elasticity (MPa) 693.51±10% Shore hardness (D) 80~85 Impact strength (j/m) 118.46±10% Tensile modulus (MPa) 320.80±10%